Six mistakes a sourcing company sees on almost every first order, and the questions a business support organisation can ask before a small company pays a deposit.
By Ruqiao Fan, Founder and CEO, Equilinq, Amsterdam and Shenzhen
Why now
At this year’s INSME Annual Meeting in Heraklion, the keynote spoke about SME competitiveness in a fragmented world. For many small companies the fragmentation is not abstract. It is a quote from a factory in Guangdong sitting in the inbox, in US dollars, with a deposit request attached.
The numbers say this is the normal case. The EU imported EUR 559.4 billion of goods from China in 2025, 6.4 percent more than in 2024 and 22.3 percent of everything it buys outside the Union (Eurostat). Small and medium-sized companies are 95.1 percent of the EU businesses that import from outside the Union, but only 38.6 percent of the value (Eurostat, reference year 2024). The typical importer is small and the typical order is small. These are the companies that walk into a chamber of commerce or an SME agency with their first production run already half decided.
I run a sourcing company between Amsterdam and Shenzhen. Most of our clients are European brands and start-ups ordering 100 to 1,000 units of their own product for the first time. The same six mistakes come up on almost every first order. None of them is about China being difficult. They come from not knowing which questions to ask before the money moves.
01. Treating the factory price as the price
A factory quote is usually ex-works or FOB: the goods at the factory gate or at a Chinese port. Everything after that is the buyer’s problem. Sea or air freight, EU customs duty (zero on some electronics, 12 percent on a cotton T-shirt under tariff heading 6109), import VAT at the rate of the country of import, a customs broker, inspection, often a tooling charge, and the supplier’s own platform fees. A “DDP” offer from a Chinese seller often turns out to be DAP in practice: the courier advances the charges and bills the buyer at the door, under the buyer’s name. The company then compares a EUR 4.20 unit price from China with a EUR 6 unit price from Portugal and chooses wrong.
The fix. One number: the landed cost per unit, to the door, before and including VAT, before any deposit is paid. If a company cannot show that number, it has not yet been quoted. Duty rates are free to look up on the Commission’s Access2Markets portal.
02. Not knowing who is on the other side
The EU SME Centre in Beijing says it receives requests for help with scams on a weekly basis. Its January 2026 guideline on minimising the risk of scams collects cases: a Croatian firm paid about EUR 20,000 for lamps that failed within days, a Bulgarian firm about EUR 70,000 for stone cut to the wrong thickness, an Estonian firm about EUR 30,000 for steel that never shipped. The red flags it names are mundane: a bank account that does not match the company name, pressure for an advance transfer, registered capital that was never paid in, extra “notary” fees before shipment.
Most sellers are honest, and many are trading companies rather than factories. That is normal, not fraud, but the buyer should know which one it is dealing with.
The fix. Four checks cost almost nothing: the business licence number and a look in China’s national enterprise registry, a bank account name that matches the licence exactly, a video call from the production floor, and a phone call on a known number before paying to any bank details that have changed. Above the amount the company can afford to lose, a paid third-party check.
03. Approving the sample on a photo
The sample is the only moment when the buyer still holds all the leverage, and it is the step most first-time buyers rush. They approve from a photo, pay the balance, and discover that the bulk run uses a lighter fabric, a thinner plastic or a cheaper chip. Inspection data suggest the problem sits largely on the buyer’s side. In the first half of 2026, QIMA found that 26 percent of electronics orders from buyers in emerging markets failed inspection, against 8 percent for buyers in North America, Western Europe and Australia, and reads the gap as a difference in quality-control habits rather than in suppliers.
The fix. Pay for a physical sample, sign it off in writing with a list of what was checked, keep an identical reference sample at both ends, and inspect before the goods leave China, either through an independent inspector or in a warehouse the buyer controls. Agree the defect tolerance in the order, not after the dispute.
04. Putting their own name on the product without knowing what that means
This is the one that surprises people most. Under the EU’s General Product Safety Regulation, which applies since 13 December 2024, a company that places a product on the market under its own name or trademark is the manufacturer (Article 13), and every consumer product needs an economic operator established in the EU, named on the product or its packaging, who is responsible for it (Article 16). For anything with Bluetooth, GPS or a battery, the same rule sits in the CE directives: the importer that brands the product takes on the manufacturer’s obligations, including the EU declaration of conformity (Radio Equipment Directive, Article 14). From 9 December 2026 the revised Product Liability Directive keeps importers liable without fault when the manufacturer is outside the Union and adds the manufacturer’s authorised representative and, if neither is in the EU, the fulfilment service provider.
A Chinese factory is beyond the reach of a European market surveillance authority, so all of this lands on the first company inside the EU. Enforcement is real. German customs flagged 8,202 suspicious consignments of radio and electrical equipment in 2025, up from 5,005 the year before, and about 89 percent were barred as non-compliant (Bundesnetzagentur). A September 2026 sweep by the Commission and national authorities of nearly 1,700 online listings on 35 marketplaces found that only 58 percent carried the manufacturer, the EU responsible person and the product identification together (Brussels Times).
The fix. List the documents before ordering, not after. A declaration of conformity signed by whoever is legally the manufacturer. Test reports for the exact variant being bought, because a “CE certificate” PDF from a factory is usually a test report for something else, or nothing at all. The responsible person’s name on the label. And the national registrations that apply: packaging under the Packaging and Packaging Waste Regulation, which applies since 12 August 2026, and electrical goods under the WEEE Directive.
05. Planning without the calendar and the minimums
Two things set the timeline, and neither appears on the quote. The first is the minimum order per colour or variant. A factory that asks for 100 pieces per colour will often accept 50 to 60 once it sees the order could go elsewhere, but only if someone asks. On a 200-piece run in two colours, that decides whether the product exists at all. The second is the Chinese New Year, which falls on 6 February 2027. Export factories commonly close for two to four weeks around it, and DHL’s planning figures put output at 30 to 35 percent of normal in late February and only back to 80 to 90 percent by mid-March. A launch in April 2027 needs samples approved before Christmas.
The fix. Fewer variants on the first run, the per-colour minimum and the small-run premium in writing, and a plan that runs backwards from the launch date and leaves a full month around the holiday.
06. Sharing the design before protecting it
China gives a trademark to whoever files first. The China IP SME Helpdesk, a free service funded by the European Commission, publishes cases of European SMEs who found their own brand registered by a stranger, including a German electronics firm that manufactured in China without a Chinese trademark.
The fix. The Helpdesk’s advice is plain: file in China about a year before you need it, even if you only manufacture there, and use an agreement that covers non-use and non-circumvention under Chinese law, not a simple non-disclosure agreement written for a European court. Share files in stages, and share the full design only with the factory that is actually producing.
What a support organisation can do
Three things, none of which requires expertise in China.
- Ask the six questions at the first enquiry: the landed cost per unit, the licence and bank name check, the signed sample, the document list, the calendar, and the trademark. If the answers are missing, the company is not ready to pay a deposit, whoever the supplier is.
- Point to the free public tools: Access2Markets for duty rates, the EU SME Centre’s scam guideline, the China IP SME Helpdesk’s case studies and FAQ. They are good and under-used.
- Keep a short list of providers who quote a landed price in euros and put the responsible person’s name on the label, and decline to pass on the ones who do not. The cheapest quote is almost never the cheapest order.
None of this is an argument for or against producing in China. It is an argument for making the first order boring: a known price, a known counterparty, an approved sample, the documents in the box, and a delivery date that survives the holiday.
About the author
Ruqiao Fan is the founder and CEO of Equilinq, which helps European companies buy and make products in China, from first sample to delivery. Equilinq is run from Amsterdam, with its own sourcing team in Shenzhen. Website: www.equilinq.eu
Sources
All opened on 20 October 2026.
- Eurostat, EU trade in goods 2025, news release of 26 March 2026. ec.europa.eu/eurostat/web/products-eurostat-news/w/ddn-20260326-4
- Eurostat, International trade in goods by enterprise characteristics, reference year 2024. ec.europa.eu/eurostat/statistics-explained/index.php?title=International_trade_in_goods_by_enterprise_characteristics
- EU SME Centre, Simple Steps to Minimise Risks of Scams, 12 January 2026. eusmecentre.org.cn/publications/simple-steps-to-minimise-risks-of-scams
- QIMA, Q3 2026 Barometer, 13 July 2026. qima.com/newsroom/news/news-q3-2026-barometer
- Regulation (EU) 2023/988 on general product safety, Articles 13 and 16. eur-lex.europa.eu/eli/reg/2023/988/oj/eng
- Directive 2014/53/EU (Radio Equipment Directive), Article 14. eur-lex.europa.eu/legal-content/EN/TXT/HTML/?uri=CELEX:32014L0053
- Directive (EU) 2024/2853 on liability for defective products, Articles 2 and 8. eur-lex.europa.eu/legal-content/EN/TXT/HTML/?uri=CELEX:32024L2853
- Bundesnetzagentur, market surveillance 2025, press release of 5 February 2026. bundesnetzagentur.de/SharedDocs/Pressemitteilungen/EN/2026/20260205_Marktueberwachung.html
- Brussels Times on the Commission and national authorities’ product safety sweep, 7 September 2026. brusselstimes.com/2307261/eu-spotlights-progress-in-product-safety-rules-but-42-listings-fall-short
- European Commission, Packaging and Packaging Waste Regulation (EU) 2025/40. environment.ec.europa.eu/topics/waste-and-recycling/packaging-waste_en
- Directive 2012/19/EU (WEEE). eur-lex.europa.eu/legal-content/EN/TXT/HTML/?uri=CELEX:32012L0019
- European Commission, Access2Markets. trade.ec.europa.eu/access-to-markets/en/home
- Hong Kong Labour Department, general holidays 2027. labour.gov.hk/eng/news/latest_holidays2027.htm
- DHL, post Chinese New Year factory restart, 5 March 2026. dhl.com/discover/en-ng/logistics-advice/import-export-advice/post-chinese-new-year-factory-restart
- China IP SME Helpdesk, case studies and FAQ. intellectual-property-helpdesk.ec.europa.eu/regional-helpdesks/china-ip-sme-helpdesk/china-case-studies_en

